6ft Table Cover
From $165.49
8.8 oz tension fabric table cover
Description
Standard 6ft Table Cover is a great table topper for trade shows, exhibitions and presentations. Our table covers are dye sublimated and are 100% washable if they ever get dirty. This table cover is made from our 8.8 oz. polyester table fabric sized for a 72″ x 30″ x 30″ display table. The table cover is sewn with rounded corners and hang approximately 2″ above the floor. The back side of this table cover is open keeping the leg area open for sitting exhibitors.
| Weight | 1 lbs |
|---|
Spec
Material:- 8.8 oz. Polyester Table Fabric
- Hemmed edges
- Dye Sublimation
| 6ft Table Cover | 3 sided (Open-back) | 4 sided (Close-back) |
|---|---|---|
| Template ( Upload ) Size | 128.5” x 65” | 127.51" x 85.01" |
| Finished Size | 126" x 62.25" | 126” x 83.5” |
| Weight | 4.6 lbs | 6.1 lbs |
File Setup
- Accepted File Formats: JPEG or PDF (single page only)
- Color Space: CMYK
- Resolution: 150dpi for raster images (More than enough for large format)
- Max File Upload Size: 300MB
- Submit artwork built to ordered size - Scaled artwork is automatically detected and fit to order
- Do not include crop marks or bleeds
Additional Tips
- Do not submit with Pantones/Spot Colors - Convert to CMYK
- Convert live fonts to outlines
- Use provided design templates when available
Rich black is an ink mixture of solid black, 100% K, with additional CMY ink values. This results in a darker tone than black ink alone. If you print black alone as 100% K, the resulting black may not be as dark as you might like.
We recommend using C 60 M 40 Y 40 K 100. This will give you a deep, dark, rich black.
*Products that are printed with dye-sublimation (9oz Premium Polyester Banner, Flags, Table Covers, Fabric Tube Displays, etc.) call for the following color values:
C 100 M 100 Y 100 K 100
Grayscale images that are converted to CMYK will have a color shift in the final print. That shift may be green or yellow.
Always check the CMYK values of your grayscale in the final CMYK document. If there are other values other than K in your grayscale image, there is a chance that the color will vary.
To eliminate all values other than K, use your Channel Mixer (adjustment layer) in Photoshop, then click "Monochrome" and adjust accordingly.
When exporting from any program such as Indesign or Illustrator, use these settings to make sure your PDF files export correctly.
Export settings for PDF files
Adobe PDF Preset is set to Press Quality
Compatibility is set to Acrobat 4 (PDF 1.3)
Compress Text and Line Art is set to Off
When using blue in your design, always make sure to leave at least a 30% difference in your Cyan and Magenta values.
100% C 100% M 0% Y 0% K
Blue is close to purple in the CMYK spectrum. Remember, use a low amount of magenta whenever using high amounts of cyan to avoid purple.
Example: C-100 M-70 Y-0 k-0
Your artwork files should be at 300 dpi.
Your designs should always start and finish in CMYK color mode.
We recommend saving as a PDF file. You may also send the file in the following types: JPG, JPEG, TIF, TIFF, and EPS.
We prefer that you send PDF with embedded or outlined fonts. PDF files are easier to handle and will likely speed up your turn-around. Remember to flatten your files before uploading.
For Roll Labels, we recommend designing:
- Vector files (e.g. EPS or PDF)
- 300 DPI or higher
- Use black (100% K)
- For fine lines and text smaller than 9pt, use black (100% K) only
